Original Kustom Art


The Flaty Eye WOBBLER - Thrashboy® Logo Head

 

 

 

 

Resin Head, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht-und Handschweiss-resistent und sehr stabil.

 

"Flaty Eye" the Thrashboy logo Head ist die erste edition von Wobblern aus unserem Studio. Jedes Stück ist handbemalt, 2k Lackiert und kommt auf einem lackierten verzinkten und lackierten Metallsockel. 

Dieses Produkt kann auf den Untergrund gestellt werden, da der metallsockel genug gewicht mit sich bringt. Ebenfalls kann dieser mit einem Magneten oder einer Kleberundelle auf dem Jeweiligen Untergrund wie Dashboard, Kofferraum, Schreibtisch, Werkbank usw. befestigt werden. Es ist ein Premium Resin Vollguss. 

 

----------------------------------------------------------------------------------------------------------

  

Resin head, hand-painted and lacquered with matt and high-gloss 2k lacquer. Thus light and hand sweat resistant and very stable.

"Flaty Eye" the Thrashboy logo Head is the first edition of wobblers from our studio. Each piece is hand painted, 2k lacquered and comes on a lacquered galvanised and painted metal base. 

 

This product can be placed on the surface, as the metal base brings enough weight with it. It can also be attached to a surface such as a dashboard, boot, desk, workbench, etc. with a magnet or adhesive roundel. It is a premium solid cast resin. 

 

 

 

Flaty Eye WOBBLER - The Thrashboy® Logo Head

CHF 85.00

  • 0.5 kg
  • available
  • 4 - 6 Tage Lieferzeit

The ROCKING HANDS - WACKY WOBBLER

 

Die "ROCKING HANDS" ist die zweite edition von Wacky Wobblern aus unserem Studio.

Die Hände sind super detailliert modeliert (traditionell von hand natürlich!). Jedes Stück ist ein Premium Resin Vollguss, handgegossen, handbemalt und lackiert und kommt auf einem lackierten Metallsockel. Die Feder ist so ausgesucht, dass sie nicht zu fest aber trotzdem schön mitschwingt.

Unsere Wacky Wobbler können stabil aufgestellt werden, da der metallsockel genug Gewicht mit sich bringt und so im Gewicht zur Hand ausgewogen ist. Ebenfalls kann dieser mit einem Magneten oder einer Kleberundelle auf dem Jeweiligen Untergrund wie Dashboard, Kofferraum, Schreibtisch, Werkbank usw. befestigt werden. 

 

Die ROCKING HANDS Wacky Wobbler sind in den Farben Monstergrün, Monsterblau und als super limited edition als chrome erhältlich!

 

----------------------------------------------------------------------------------------------------------

English

  

The "ROCKING HANDS" is the second edition of Wacky Wobblers from our studio.

The hands are sculpted in great detail (traditionally by hand of course!). Each piece is a premium resin full casting, hand cast, hand painted and lacquered and comes on a lacquered metal base. The spring is selected so that it is not too tight but still resonates beautifully.

 

Our Wacky Wobblers can be set up in a stable way, as the metal base brings enough weight with it and is thus balanced in weight to the hand. It can also be attached to a surface such as a dashboard, car boot, desk, workbench, etc. with a magnet or an adhesive roundel. 

 

 

The ROCKING HANDS Wacky Wobblers are available in the colours monster green, monster blue and as a super limited edition chrome!

 

 

 

The ROCKING HANDS - WACKY WOBBLER

CHF 80.00

  • 0.25 kg
  • available
  • 4 - 6 Tage Lieferzeit

The FUCKYOU HAND - WACKY WOBBLER

 

Die "FUCKYOU HANDS" ist die dritte edition von Wacky Wobblern aus unserem Studio.

Die Hände sind super detailliert modelliert (traditionell von hand natürlich!). Jedes Stück ist ein Premium Resin Vollguss, handgegossen, handbemalt und lackiert und kommt auf einem lackierten Metallsockel. Die Feder ist so ausgesucht, dass sie nicht zu fest aber trotzdem schön mitschwingt.

Unsere Wacky Wobbler können stabil aufgestellt werden, da der Metallsockel genug Gewicht mit sich bringt und so im Gewicht zur Hand ausgewogen ist. Ebenfalls kann dieser mit einem Magneten oder einer Kleberundelle auf dem Jeweiligen Untergrund wie Dashboard, Kofferraum, Schreibtisch, Werkbank usw. befestigt werden. 

 

Die ROCKING HANDS Wacky Wobbler sind in den Farben Monstergrün, Monsterblau und als super limited edition als chrome erhältlich!

 

----------------------------------------------------------------------------------------------------------

English

  

The "FUCKYOU HANDS" is the third edition of Wacky Wobblers from our studio.

The hands are sculpted in great detail (traditionally by hand of course!). Each piece is a premium resin full casting, hand cast, hand painted and lacquered and comes on a lacquered metal base. The spring is selected so that it is not too tight but still resonates beautifully.

 

Our Wacky Wobblers can be set up in a stable way, as the metal base brings enough weight with it and is thus balanced in weight to the hand. It can also be attached to a surface such as a dashboard, car boot, desk, workbench, etc. with a magnet or an adhesive roundel. 

 

 

The FUCKYOU HANDS Wacky Wobblers are available in the colours monster green, monster blue and as a super limited edition chrome!

 

 

 

The ROCKING HANDS - WACKY WOBBLER

CHF 80.00

  • 0.25 kg
  • available
  • 4 - 6 Tage Lieferzeit

BURING HEART - "The Oldskool Series"

BURNING HEART ist das dritte Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Das BURNING HEART gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So, dass die Bilder dann perfekt zusammen kombiniert werden können. 

 

Nicht zu gross und nicht zu klein, so passten die Bilder an jeden Ort. Und da die Bilder 3-Dimensional sind werden sie zu richtigen Eyecatcher!

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English 

 

BURNING HEART is the third motif of my "The Oldskool Series". 

As always, everything is handmade, from the modelling to the mould making and casting to the final lacquering. 

 

The BURNING HEART is available in different colours! It is a resin full casting on wooden back with frame.

 

The colours will be the same throughout the series. So that the pictures can then be perfectly combined together. 

 

 

Not too big and not too small, so the pictures fit in every place. And because the pictures are 3-dimensional, they become real eye-catchers!

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

 

 

BURNING HEART - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING HEART - "The Oldskool Series"

BURNING HEART ist das dritte Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Das BURNING HEART gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So, dass die Bilder dann perfekt zusammen kombiniert werden können. 

 

Nicht zu gross und nicht zu klein, so passten die Bilder an jeden Ort. Und da die Bilder 3-Dimensional sind werden sie zu richtigen Eyecatcher!

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING HEART is the third motif of my "The Oldskool Series". 

As always, everything is handmade, from the modelling to the mould making and casting to the final lacquering. 

 

The BURNING HEART is available in different colours! It is a resin full casting on wooden back with frame.

 

The colours will be the same throughout the series. So that the pictures can then be perfectly combined together. 

 

 

Not too big and not too small, so the pictures fit in every place. And because the pictures are 3-dimensional, they become real eye-catchers!

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

 

 

BURNING HEART - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING HEART - "The Oldskool Series"

BURNING HEART ist das dritte Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Das BURNING HEART gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So, dass die Bilder dann perfekt zusammen kombiniert werden können. 

 

Nicht zu gross und nicht zu klein, so passten die Bilder an jeden Ort. Und da die Bilder 3-Dimensional sind werden sie zu richtigen Eyecatcher!

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING HEART is the third motif of my "The Oldskool Series". 

As always, everything is handmade, from the modelling to the mould making and casting to the final lacquering. 

 

The BURNING HEART is available in different colours! It is a resin full casting on wooden back with frame.

 

The colours will be the same throughout the series. So that the pictures can then be perfectly combined together. 

 

 

Not too big and not too small, so the pictures fit in every place. And because the pictures are 3-dimensional, they become real eye-catchers!

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

 

 

BURNING HEART - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING HEART - "The Oldskool Series"

BURNING HEART ist das dritte Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Das BURNING HEART gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So, dass die Bilder dann perfekt zusammen kombiniert werden können. 

 

Nicht zu gross und nicht zu klein, so passten die Bilder an jeden Ort. Und da die Bilder 3-Dimensional sind werden sie zu richtigen Eyecatcher!

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING HEART is the third motif of my "The Oldskool Series". 

As always, everything is handmade, from the modelling to the mould making and casting to the final lacquering. 

 

The BURNING HEART is available in different colours! It is a resin full casting on wooden back with frame.

 

The colours will be the same throughout the series. So that the pictures can then be perfectly combined together. 

 

 

Not too big and not too small, so the pictures fit in every place. And because the pictures are 3-dimensional, they become real eye-catchers!

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

 

 

BURNING HEART - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING HEART - "The Oldskool Series"

BURNING HEART ist das dritte Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Das BURNING HEART gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So, dass die Bilder dann perfekt zusammen kombiniert werden können. 

 

Nicht zu gross und nicht zu klein, so passten die Bilder an jeden Ort. Und da die Bilder 3-Dimensional sind werden sie zu richtigen Eyecatcher!

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING HEART is the third motif of my "The Oldskool Series". 

As always, everything is handmade, from the modelling to the mould making and casting to the final lacquering. 

 

The BURNING HEART is available in different colours! It is a resin full casting on wooden back with frame.

 

The colours will be the same throughout the series. So that the pictures can then be perfectly combined together. 

 

 

Not too big and not too small, so the pictures fit in every place. And because the pictures are 3-dimensional, they become real eye-catchers!

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

 

 

BURNING HEART - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING DICE - "The Oldskool Series"

BURNING DICE ist das zweite Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Die BURNING DICE gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING DICE is the second motif of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The BURNING DICE is available in different colours! It is a resin solid cast on wooden back with frame.

 

The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

BURNING DICE - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING DICE - "The Oldskool Series"

BURNING DICE ist das zweite Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Die BURNING DICE gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING DICE is the second motif of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The BURNING DICE is available in different colours! It is a resin solid cast on wooden back with frame.

 

The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

BURNING DICE - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING DICE - "The Oldskool Series"

BURNING DICE ist das zweite Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Die BURNING DICE gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING DICE is the second motif of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The BURNING DICE is available in different colours! It is a resin solid cast on wooden back with frame.

 

The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

Burning DICE - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING DICE - "The Oldskool Series"

BURNING DICE ist das zweite Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Die BURNING DICE gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English 

 

BURNING DICE is the second motif of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The BURNING DICE is available in different colours! It is a resin solid cast on wooden back with frame.

 

The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

Burning DICE - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

BURING DICE - "The Oldskool Series"

BURNING DICE ist das zweite Motiv meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Die BURNING DICE gibt es in verschiedenen Farbvarianten! Es ist ein Resin Vollguss auf Holzrückwand mit Rahmen.

Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

BURNING DICE is the second motif of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The BURNING DICE is available in different colours! It is a resin solid cast on wooden back with frame.

 

The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approx. 25 cm x 20 cm.

 

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed in so that the picture hangs perfectly!

 

 

 

 

 

Burning DICE - "The Oldskool Series"

CHF 450.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

The ANCHOR - "The Oldskool Series"

The ANCHOR ist das erste Bild meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Den ANKER gibt es in verschiedenen Farbvarianten! Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

"The The ANCHOR is the first picture of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The ANKER is available in different colours! The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approximately: 20 cm x 25 cm

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed into the frame so that the picture hangs perfectly!

 

 

 

 

The ANCHOR - "The Oldskool Series"

CHF 380.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

The ANCHOR - "The Oldskool Series"

The ANCHOR ist das erste Bild meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Den ANKER gibt es in verschiedenen Farbvarianten! Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das

Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

"The The ANCHOR is the first picture of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The ANKER is available in different colours! The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approximately: 20 cm x 25 cm

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed into the frame so that the picture hangs perfectly!

 

 

 

 

The ANCHOR - "The Oldskool Series"

CHF 380.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

The ANCHOR - "The Oldskool Series"

The ANCHOR ist das erste Bild meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Den ANKER gibt es in verschiedenen Farbvarianten! Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

"The The ANCHOR is the first picture of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The ANKER is available in different colours! The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approximately: 20 cm x 25 cm

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed into the frame so that the picture hangs perfectly!

 

 

 

 

The ANCHOR - "The Oldskool Series"

CHF 380.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

The ANCHOR - "The Oldskool Series"

The ANCHOR ist das erste Bild meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Den ANKER gibt es in verschiedenen Farbvarianten! Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

"The The ANCHOR is the first picture of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The ANKER is available in different colours! The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approximately: 20 cm x 25 cm

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed into the frame so that the picture hangs perfectly!

 

 

 

 

The ANCHOR - "The Oldskool Series"

CHF 380.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

The ANCHOR - "The Oldskool Series"

The ANCHOR ist das erste Bild meiner "The Oldskool Series". 
Wie immer alles Handarbeit, vom Modellieren über den Formenbau und der Giessarbeit bis zum fertig lackieren. 

Den ANKER gibt es in verschiedenen Farbvarianten! Die Farben werden sich über die ganze Serie gleichen. So dass verschiedenen Bilder dann perfekt kombiniert werden können. 

 

Die Aussen-Grösse des Rahmens ist ca.: 25 cm x 20 cm

Hinten ist das Bild signiert und mit Original-Siegel versehen. Ebenfalls ist ein stabiler Aufhänger mit Zahnung verschraubt, damit das Bild auch perfekt hängt!

 

----------------------------------------------------------------------------------------------------------

English

 

"The The ANCHOR is the first picture of my "The Oldskool Series". 

As always, everything is handmade, from modelling, mould making and casting to the final painting. 

 

The ANKER is available in different colours! The colours will be the same throughout the series. So that different pictures can be combined perfectly. 

 

The outside size of the frame is approximately: 20 cm x 25 cm

The picture is signed on the back and has an original seal. A stable hanger with teeth is also screwed into the frame so that the picture hangs perfectly!

 

 

 

 

The ANCHOR - "The Oldskool Series"

CHF 380.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

"SADLY" The Skull

Resin Head, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht-und Handschweiss-resistent und sehr stabil.

 

"SADLY" the Skull ist eine Limited Edition von 10 Stück. Jedes Stück ist handbemalt, nummeriert, signiert und kommt auf einem lackierten Holzsockel. 

Dieses Produkt kann auch als Shifter Knob (Ganghebelschalter) verwendet werden. Es ist ein Premium Resin Vollguss. Somit kann das gewünschte Gewinde direkt unten reingeschnitten werden oder man macht eine passende Gewindehülse als Adapter rein. 

 

----------------------------------------------------------------------------------------------------------

English

  

Resin Head, handpainted and varnished with matt and high gloss 2k lacquer. Therefore light stable, hand sweat resistant and very stable.

 

"SADLY" The Skull is a limited edition of 10 pieces. Each piece is handpainted, numbered, signed and comes on a lacquered wooden base. 

This product can also be used as Shifter Knob. It is a premium resin full cast. The desired thread can be cut directly into the bottom of the knob or you can make a matching threaded sleeve as an adapter. 

 

 

 

SADLY the Skull Limited Edition

CHF 300.00

  • 0.8 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

"Crazy Eye" Edition II Shifterknob

 

Resin Head, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht-und Handschweiss-resistent und sehr stabil.

 

"The Crazy Eye" ist eine Limited Edition von 6 Stück. Jedes Stück ist handbemalt, nummeriert, signiert und kommt auf einem lackierten Holzsockel. 

Dieses Produkt kann auch als Shifter Knob (Ganghebelschalter) verwendet werden. Es ist ein Premium Resin Vollguss. Somit kann das gewünschte Gewinde direkt unten reingeschnitten werden oder man macht eine passende Gewindehülse als Adapter rein. 

 

----------------------------------------------------------------------------------------------------------

English

  

Resin Head, handpainted and varnished with matt and high gloss 2k lacquer. Therefore light stable, hand sweat resistant and very stable.

 

"The Crazy Eye" is a limited edition of 6 pieces. Each piece is handpainted, numbered, signed and comes on a lacquered wooden base. 

This product can also be used as Shifter Knob. It is a premium resin full cast. The desired thread can be cut directly into the bottom of the knob or you can make a matching threaded sleeve as an adapter. 

 

 

 

"Crazy Eye" Edition II Shifterknob

CHF 300.00

  • 0.8 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

"The Freaky Monkey"

 

Resin Head, handbemalt und mit Matt-und Hochglanz 2k Lack Lackiert. Somit Licht-und Handschweiss-resistent und sehr stabil.

 

"The Freaky Monkey" ist eine Limited Edition von 10 Stück. Jedes Stück ist handbemalt, nummeriert, signiert und kommt auf einem lackierten und handbeschrifteten Holzsockel. 

Dieses Produkt kann auch als Shifter Knob (Ganghebelschalter) verwendet werden. Es ist ein Premium Resin Vollguss. Somit kann das gewünschte Gewinde direkt unten reingeschnitten werden oder man macht eine passende Gewindehülse als Adapter rein. 

 

----------------------------------------------------------------------------------------------------------

English

 

 Resin Head, handpainted and varnished with matt and high gloss 2k lacquer. Therefore light stable, hand sweat resistant and very stable.

 

"The Freaky Monkey" is a limited edition of 10 pieces. Each piece is handpainted, numbered, signed and comes on a lacquered and hand-written wooden base. 

This product can also be used as Shifter Knob. It is a premium resin full cast. The desired thread can be cut directly into the bottom of the knob or you can make a matching threaded sleeve as an adapter. 

 

 

 

Freaky Monkey Limited edition

CHF 400.00

  • 0.8 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

"The Freaky Monkey" Flat Cap Edition

"The Freaky Monkey" FlatCap edition ist eine Limited Edition von 5 Stück!! Jedes Stück ist handbemalt, nummeriert, signiert und kommt auf einem lackierten und handbeschrifteten Holzsockel. Dieses Produkt ist 100% handgemacht! Traditionell von Hand modelliert, Formenbau, Guss aus premium 2k Resin, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht- und Handschweiss-resistent und sehr stabil.

 

Dieses Produkt kann auch als Shifter Knob (Ganghebelschalter) verwendet werden. Es ist ein Premium Resin Vollguss. Somit kann das gewünschte Gewinde direkt unten reingeschnitten werden oder man macht eine passende Gewindehülse als Adapter rein. 

 

----------------------------------------------------------------------------------------------------------

English

 

"The Freaky Monkey" FlatCap edition is a limited edition of 5 pieces! Each piece is handpainted, numbered, signed and comes on a varnished and hand-written wooden base. 

This product is 100% handmade!Traditionally hand modeled, mold making, cast out of premium 2part resin, hand painted and lacquered with matt and high gloss 2k lacquer.  resin Thus light stable, hand sweat resistant and very stable.

This product can also be used as Shifter Knob. It is a premium resin full cast. The desired thread can be cut directly into the bottom of the knob or you can make a matching threaded sleeve as an adapter. 

 

 

 

Freaky Monkey - Flat Cap Limited Edition

CHF 480.00

  • 0.8 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

"The Freaky Monkey" Working Cap Edition, N° 3/5

"The Freaky Monkey" Working Cap edition ist eine Limited Edition von 5 Stück!! Jedes Stück ist handbemalt, nummeriert, signiert und kommt auf einem lackierten und handbeschrifteten Holzsockel. 

Dieses Produkt ist 100% handgemacht! Traditionell von Hand modelliert, Formenbau, Guss aus premium 2k Resin, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht- und Handschweiss-resistent und sehr stabil.

 

Dieses Produkt kann auch als Shifter Knob (Ganghebelschalter) verwendet werden. Es ist ein Premium Resin Vollguss. Und somit kann das gewünschte Gewinde direkt unten reingeschnitten werden oder man macht eine passende Gewindehülse als Adapter rein. 

 

----------------------------------------------------------------------------------------------------------

English

 

"The Freaky Monkey" Working Cap edition is a limited edition of 5 pieces! Each piece is handpainted, numbered, signed and comes on a varnished and hand-written wooden base. 

This product is 100% handmade!Traditionally hand modeled, mold making, cast out of premium 2part resin, hand painted and lacquered with matt and high gloss 2k lacquer.  resin Thus light stable, hand sweat resistant and very stable.

This product can also be used as Shifter Knob. It is a premium resin full cast. The desired thread can be cut directly into the bottom of the knob or you can make a matching threaded sleeve as an adapter. 

 

 

 

"The Freaky Monkey" Working Cap Edition, N° 3/5

CHF 480.00

  • 0.8 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

"The WeirDaruma" Yellow Edition

"The WeirDaruma" yellow edition ist eine Limited Edition von 2 Stück!! Es gab noch weitere rote WeirDarumas.  Insgesamt waren es 10 Sück. Von den gelben gibt es lediglich 2 Stück! Diese habe ich anlässlich meiner Ausstellung in Japan im Dezember 2019 gemacht. Auch dieser hier war in Japan mit dabei.

Dieses Produkt ist 100% handgemacht! Traditionell von Hand modelliert, Formenbau, Guss aus premium 2k Resin, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht- und Handschweiss-resistent und sehr stabil. 

Jedes Stück ist nummeriert und handsigniert.

 

Jeder "Weidraruma" kommt in einem handgenähten Stoffbeutel und einer gedruckten Step by Step Beschreibung, der die verschiedenen Arbeitsschritte dokumentiert.

 

----------------------------------------------------------------------------------------------------------

English

 

"The WeirDaruma" yellow edition is a limited edition of 2 pieces! There were more red WeirDarumas. In total there were 10 pieces. There are only 2 pieces of the yellow ones! I made these on the occasion of my exhibition in Japan in December 2019. This one was also in Japan.

This product is 100% handmade! Traditionally hand sculpted, mold making, cast out of premium 2k resin and  hand painted all out of the same two hands! Finished with matt and high gloss 2part clearcoat. Thus light stable, hand sweat resistant and very stable. 

Each piece is numbered and hand-signed.

 

Each "Weidraruma" comes in a hand sewn fabric bag. And with a printed step by step description which documents the different steps of the production.

 

 

 

WeirDaruma Limited Edition

CHF 860.00

  • 1.2 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit


" SAILOR P " - Blue / White - Limited Edition

The "SAILOR P" ist eine 3D Relief Skulptur mit Wandaufhängung. Es gibt von dieser "SAILOR P" limited edition nur 10 Stück!!

 

Der SAILOR P ist die perfekte Wand-Deko für dein Restaurant, deine Bar, dein Wohnzimmer oder deine Garage!

Dieses Produkt ist 100% handgemacht! Traditionell von Hand modelliert, Formenbau, Guss aus premium 2k Resin, handbemalt und mit Matt-Lack versiegelt. 

Jedes Stück ist auf der Rückseite nummeriert und handsigniert und mit einer Wandaufhängung Ausgestattet.

Der Kopf ist etwas grösser als lebensgroß. Der Rettungsring der den Rahmen darstellt hat die Aussenmasse von 33cm.

 

Er wird perfekt in Schaumstoff verpackt geliefert.

 

----------------------------------------------------------------------------------------------------------

English

 

The "SAILOR P" is a 3D relief sculpture with wall mounting. There are only 10 pieces of this "SAILOR P" limited edition!!!

 

The SAILOR P is the perfect wall decoration for your restaurant, bar, living room or garage!

This product is 100% handmade! Traditionally hand modelled, mould made, cast in premium 2k resin, hand painted and sealed with matt lacquer. 

Each piece is numbered and hand signed on the back and comes with a wall mount.

The head is slightly larger than life size. The life ring that makes up the frame measures 33cm.

 

It comes perfectly packed in foam.

 

 

 

" Salor P " blue/white - Limited Edition

CHF 870.00

  • 5 kg
  • Attention! Only limited number available..
  • 4 - 6 Tage Lieferzeit

" SAILOR P " - Red / White - Limited Edition

The "SAILOR P" ist eine 3D Relief Skulptur mit Wandaufhängung. Es gibt von dieser "SAILOR P" limited edition nur 10 Stück!!

 

Der SAILOR P ist die perfekte Wand-Deko für dein Restaurant, deine Bar, dein Wohnzimmer oder deine Garage!

Dieses Produkt ist 100% handgemacht! Traditionell von Hand modelliert, Formenbau, Guss aus premium 2k Resin, handbemalt und mit Matt-Lack versiegelt. 

Jedes Stück ist auf der Rückseite nummeriert und handsigniert und mit einer Wandaufhängung Ausgestattet.

Der Kopf ist etwas grösser als lebensgroß. Der Rettungsring der den Rahmen darstellt hat die Aussenmasse von 33cm.

 

Er wird perfekt in Schaumstoff verpackt geliefert.

 

----------------------------------------------------------------------------------------------------------

English

 

The "SAILOR P" is a 3D relief sculpture with wall mounting. There are only 10 pieces of this "SAILOR P" limited edition!!!

 

The SAILOR P is the perfect wall decoration for your restaurant, bar, living room or garage!

This product is 100% handmade! Traditionally hand modelled, mould made, cast in premium 2k resin, hand painted and sealed with matt lacquer. 

Each piece is numbered and hand signed on the back and comes with a wall mount.

The head is slightly larger than life size. The life ring that makes up the frame measures 33cm.

 

It comes perfectly packed in foam.

 

 

 

" Salor P " red/white Limited Edition

CHF 870.00

  • 5 kg
  • Sold out... Sorry!

more stuff soon, stay tooned!


latest Sold out..

"The Dessert Monster" Darkblue- Kustom Christmas Baubles

 

Handgegossen, Resin Hohlguss, sehr leicht und doch stabil!

Die Christbaumkugel ist 100% handgemacht! Modelliert, Formenbau, Gegossen und Handbemalt! Jedes Stück ist ein Einzelstück!! Jede Kugel ist von hand Lackiert in jeweils einer anderen Farbe geflaked (Glitzer Lackiert) in 7 Schichten Hochglanz lackiert. Und die Front mit dem Gesicht ist handbemalt mit Pinsel und Airbrush, matt und Glanz. 

 

Ich habe 24 Kugeln gegossen, vier Charakteren und je 6 Kugeln von jedem Charakter. 

Jede ist somit ein Einzelstück für sich und wir die deine Weihnachten so richtig Monster-Cool machen!! Auch als Geschenk machen sich die Kugeln super. Jede ist in einem Stoffbeutel und einer Würfelbox perfekt verpackt!

 

Grösse: die Kugel selbst ist 8cm Ø, mit Zunge und Hacken oben ca. 13 cm hoch.

Das letze Bild zeigt asl Beispiel die Verpackung!

 Sold out!

----------------------------------------------------------------------------------------------------------

English  

 

Hand cast, resin hollow casting, very light yet strong!

 

The Christmas tree ball is 100% handmade! Modeled, mold making, cast and hand painted! Each piece is unique! Each ball is hand painted in a different color each flaked (glitter painted) in 7 layers of high gloss paint. And the front with the face is hand painted with brush and airbrush, matte and gloss. 

 

I cast 24 balls, four characters and 6 balls of each character. 

 

Each is thus a unique piece for itself and we make the your Christmas so really monster cool!!! The balls also make a great gift. Each is perfectly packaged in a cloth bag and a cube box!

¨

Size: the ball itself is 8 cm Ø, with tongue and hooks on top about 14 cm high.

The last picture shows asl example the packaging!

 

 

 

"The GIFT LOVER" - DarkBlueKustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

The PowerGoose "Flaty Goose" Limited edition

The "Flaty Goose" ist eine weitere limited edition aus der PowerGoose Series. Es gibt von dieser "Flaty Goose" nur 13 Stück!!

Dieses Produkt ist 100% handgemacht! Traditionell von Hand modelliert, Formenbau, Guss aus premium 2k Resin, handbemalt und mit Matt- und Hochglanz 2k Lack lackiert. Somit Licht- und Handschweiss-resistent und sehr stabil. 

Jedes Stück ist nummeriert und handsigniert und kommt auf einem lackierten Holzsockel, welcher auf der Frontseite handbeschriftet ist. 

Der Kopf ist ca. 360 g schwer (nur der Kopf ohne Sockel) 

 Sold out!

----------------------------------------------------------------------------------------------------------

English

 

The "Flaty Goose" is another limited edition from the PowerGoose Series. There are only 13 pieces of this "Flaty Goose"!

This product is 100% handmade! Traditional hand sculpted, mold making, cast out of premium 2part resin, hand painted and finished with matt and high gloss 2part lacquer. Thus light stable, hand sweat resistant and very stable. 

Each piece is numbered and hand-signed and comes on a lacquered wooden base which is hand-written on the front side. 

The head is aprox. 360g heavy (just the head without the base) 

 

 

 

PowerGoose Series "The Flaty Goose" Limited Edition

CHF 380.00

  • 1.2 kg
  • Sold out... Sorry!

"The Dessert Monster" Silver- Kustom Christmas Baubles

 

Handgegossen, Resin Hohlguss, sehr leicht und doch stabil!

Die Christbaumkugel ist 100% handgemacht! Modelliert, Formenbau, Gegossen und Handbemalt! Jedes Stück ist ein Einzelstück!! Jede Kugel ist von hand Lackiert in jeweils einer anderen Farbe geflaked (Glitzer Lackiert) in 7 Schichten Hochglanz lackiert. Und die Front mit dem Gesicht ist handbemalt mit Pinsel und Airbrush, matt und Glanz. 

 

Ich habe 24 Kugeln gegossen, vier Charakteren und je 6 Kugeln von jedem Charakter. 

Jede ist somit ein Einzelstück für sich und wir die deine Weihnachten so richtig Monster-Cool machen!! Auch als Geschenk machen sich die Kugeln super. Jede ist in einem Stoffbeutel und einer Würfelbox perfekt verpackt!

 

Grösse: die Kugel selbst ist 8cm Ø, mit Zunge und Hacken oben ca. 13 cm hoch.

Das letze Bild zeigt asl Beispiel die Verpackung!

 Sold out!

----------------------------------------------------------------------------------------------------------

English  

 

Hand cast, resin hollow casting, very light yet strong!

 

The Christmas tree ball is 100% handmade! Modeled, mold making, cast and hand painted! Each piece is unique! Each ball is hand painted in a different color each flaked (glitter painted) in 7 layers of high gloss paint. And the front with the face is hand painted with brush and airbrush, matte and gloss. 

 

I cast 24 balls, four characters and 6 balls of each character. 

 

Each is thus a unique piece for itself and we make the your Christmas so really monster cool!!! The balls also make a great gift. Each is perfectly packaged in a cloth bag and a cube box!

¨

Size: the ball itself is 8 cm Ø, with tongue and hooks on top about 14 cm high.

The last picture shows asl example the packaging!

 

 

 

"The GIFT LOVER" - Silver Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The KrampFink" FreakyGold- Kustom Christmas Baubles

 

Handgegossen, Resin Hohlguss, sehr leicht und doch stabil!

Die Christbaumkugel ist 100% handgemacht! Modelliert, Formenbau, Gegossen und Handbemalt! Jedes Stück ist ein Einzelstück!! Jede Kugel ist von hand Lackiert in jeweils einer anderen Farbe geflaked (Glitzer Lackiert) in 7 Schichten Hochglanz lackiert. Und die Front mit dem Gesicht ist handbemalt mit Pinsel und Airbrush, matt und Glanz. 

 

Ich habe 24 Kugeln gegossen, vier Charakteren und je 6 Kugeln von jedem Charakter. 

Jede ist somit ein Einzelstück für sich und wir die deine Weihnachten so richtig Monster-Cool machen!! Auch als Geschenk machen sich die Kugeln super. Jede ist in einem Stoffbeutel und einer Würfelbox perfekt verpackt!

 

Grösse: die Kugel selbst ist 8cm Ø, mit Zunge und Hacken oben ca. 13 cm hoch.

Das letze Bild zeigt asl Beispiel die Verpackung!

 Sold out!

----------------------------------------------------------------------------------------------------------

English   

 

Hand cast, resin hollow casting, very light yet strong!

 

The Christmas tree ball is 100% handmade! Modeled, mold making, cast and hand painted! Each piece is unique! Each ball is hand painted in a different color each flaked (glitter painted) in 7 layers of high gloss paint. And the front with the face is hand painted with brush and airbrush, matte and gloss. 

 

I cast 24 balls, four characters and 6 balls of each character. 

 

Each is thus a unique piece for itself and we make the your Christmas so really monster cool!!! The balls also make a great gift. Each is perfectly packaged in a cloth bag and a cube box!

¨

Size: the ball itself is 8 cm Ø, with tongue and hooks on top about 14 cm high.

The last picture shows asl example the packaging!

 

 

 

"The KramFink" - FreakyGold Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

The "Angry Duck" Limited edition (vintage green1)

 

SOLD OUT!  

The "Angry Duck" ist eine super limited edition aus der PowerGoose Series. Es ist die erste Ganzkörperfigur aus dem Hause Thrashboy®. Mit sehr viel Liebe zu vielen Details. Es ist ein premium 2k Resin Guss. Wie immer ist alles zu 100% handmade. Vom Modellieren, Formenbau, Giessen und Bemalen, alles aus den gleichen zwei Händen. :) 

 

Es gibt von dieser "Angry Duck" 10 Stück!! Jede Figur ist in einer anderen Farbe handbemalt. Somit ist jede Figur ein Einzelstück!

 

Die Figuren sind mit starken Magneten an den Socke montiert. Das ermöglicht, daas der Angry Duck auch freistehend ohne Sockel aufgestellt werden kann. Die Figur hällt so gut auf dem Sockel und ist somit gegen unabsichtliches Umfallen geschätzt.

 

Jedes Stück ist nummeriert und handsigniert und kommt auf einem lackierten Holzsockel, welcher auf der Frontseite handbeschriftet ist. 

 

Masse:

 

Sockel unten 14cm x 11cm

 

Ganze Figur höhe ca.26cm  

 

 

----------------------------------------------------------------------------------------------------------

English

 

The "Angry Duck" is a super limited edition from the PowerGoose Series. It is the first full body figure from Thrashboy®. It is a premium 2k resin casting. As always, everything is 100% handmade. From modeling, mold making, casting and painting, all from the same two hands.

 

There are 10 of this "Angry Duck"!!! Each figure is hand painted in a different color. Thus, each figure is unique!

 

The figures are mounted on the sock with strong magnets. This makes it possible that the Angry Duck can also be placed free-standing without a base. The figure holds so well on the base and is thus estimated against accidental falling.

 

Each piece is numbered and hand signed and comes on a lacquered wooden base, which is hand-lettered on the front. 

 

Dimensions:

 

Base bottom 14cm x 11cm

 

Whole figure height ca.26cm 

 

SOLD OUT! 

 

 

The "Angry Duck" Limited Edition (vintage green1)

CHF 680.00

  • 2.1 kg
  • Sold out... Sorry!

"The KrampFink" Copper- Kustom Christmas Baubles

 

 Sold out!   

 

 

 

"The KramFink" - Copper Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

The "Angry Duck" Limited edition (red tan)

Sold out!   

 

 

 

The "Angry Duck" Limited Edition (red tan)

CHF 680.00

  • 2.1 kg
  • Sold out... Sorry!

The "Angry Duck" Limited edition (tan brown)

 Sold out!  

T

The "Angry Duck" Limited Edition (tan brown)

CHF 680.00

  • 2.1 kg
  • Sold out... Sorry!

The "Angry Duck" Limited edition (vintage green #7/10)

 

 SOLD OUT!  

The "Angry Duck" ist eine super limited edition aus der PowerGoose Series. Es ist die erste Ganzkörperfigur aus dem Hause Thrashboy®. Mit sehr viel Liebe zu vielen Details. Es ist ein premium 2k Resin Guss. Wie immer ist alles zu 100% handmade. Vom Modellieren, Formenbau, Giessen und Bemalen, alles aus den gleichen zwei Händen. :) 

 

Es gibt von dieser "Angry Duck" 10 Stück!! Jede Figur ist in einer anderen Farbe handbemalt. Somit ist jede Figur ein Einzelstück!

 

Die Figuren sind mit starken Magneten an den Socke montiert. Das ermöglicht, daas der Angry Duck auch freistehend ohne Sockel aufgestellt werden kann. Die Figur hällt so gut auf dem Sockel und ist somit gegen unabsichtliches Umfallen geschätzt.

 

Jedes Stück ist nummeriert und handsigniert und kommt auf einem lackierten Holzsockel, welcher auf der Frontseite handbeschriftet ist. 

 

Masse:

 

Sockel unten 14cm x 11cm

 

Ganze Figur höhe ca.26cm  

 

 

----------------------------------------------------------------------------------------------------------

English

 

The "Angry Duck" is a super limited edition from the PowerGoose Series. It is the first full body figure from Thrashboy®. It is a premium 2k resin casting. As always, everything is 100% handmade. From modeling, mold making, casting and painting, all from the same two hands.

 

There are 10 of this "Angry Duck"!!! Each figure is hand painted in a different color. Thus, each figure is unique!

 

The figures are mounted on the sock with strong magnets. This makes it possible that the Angry Duck can also be placed free-standing without a base. The figure holds so well on the base and is thus estimated against accidental falling.

 

Each piece is numbered and hand signed and comes on a lacquered wooden base, which is hand-lettered on the front. 

 

Dimensions:

 

Base bottom 14cm x 11cm

 

Whole figure height ca.26cm 

 

 SOLD OUT!  

 

 

The "Angry Duck" Limited Edition (vintage green)

CHF 680.00

  • 2.1 kg
  • Sold out... Sorry!

The "Angry Duck" Limited edition (used black)

Sold out!   

 

 

 

The "Angry Duck" Limited Edition (used black)

CHF 680.00

  • 2.1 kg
  • Sold out... Sorry!

"The Dessert Monster" blueblue- Kustom Christmas Baubles

Sold out!  

 

 

 

"The GIFT LOVER" - Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The KrampFink" KrazyGold- Kustom Christmas Baubles

 Sold out! 

 

 

"The KramFink" - KrazyGold Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The KrampFink" GreenOne- Kustom Christmas Baubles

Sold out! 

 

 

"The KramFink" - GreenOne Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The KrampFink" Gold- Kustom Christmas Baubles

Sold out!

 

 

"The KramFink" - Gold Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The GIFT LOVER" - Purple Kustom Christmas Baubles

Sold out! 

 

 

 

"The GIFT LOVER" - Purple Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The Dessert Monster" Gold- Kustom Christmas Baubles

 

Handgegossen, Resin Hohlguss, sehr leicht und doch stabil!

Die Christbaumkugel ist 100% handgemacht! Modelliert, Formenbau, Gegossen und Handbemalt! Jedes Stück ist ein Einzelstück!! Jede Kugel ist von hand Lackiert in jeweils einer anderen Farbe geflaked (Glitzer Lackiert) in 7 Schichten Hochglanz lackiert. Und die Front mit dem Gesicht ist handbemalt mit Pinsel und Airbrush, matt und Glanz. 

 

Ich habe 24 Kugeln gegossen, vier Charakteren und je 6 Kugeln von jedem Charakter. 

Jede ist somit ein Einzelstück für sich und wir die deine Weihnachten so richtig Monster-Cool machen!! Auch als Geschenk machen sich die Kugeln super. Jede ist in einem Stoffbeutel und einer Würfelbox perfekt verpackt!

 

Grösse: die Kugel selbst ist 8cm Ø, mit Zunge und Hacken oben ca. 13 cm hoch.

Das letze Bild zeigt asl Beispiel die Verpackung!

 Sold out!

----------------------------------------------------------------------------------------------------------

 

English  

 

Hand cast, resin hollow casting, very light yet strong!

 

The Christmas tree ball is 100% handmade! Modeled, mold making, cast and hand painted! Each piece is unique! Each ball is hand painted in a different color each flaked (glitter painted) in 7 layers of high gloss paint. And the front with the face is hand painted with brush and airbrush, matte and gloss. 

 

I cast 24 balls, four characters and 6 balls of each character. 

 

Each is thus a unique piece for itself and we make the your Christmas so really monster cool!!! The balls also make a great gift. Each is perfectly packaged in a cloth bag and a cube box!

¨

Size: the ball itself is 8 cm Ø, with tongue and hooks on top about 14 cm high.

The last picture shows asl example the packaging!

 

 

 

"The GIFT LOVER" - Gold Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

"The GIFT LOVER" - Blue Kustom Christmas Baubles

Sold out! 

 

 

"The GIFT LOVER" - Blue Kustom Christmas Baubles

CHF 200.00

  • 0.5 kg
  • Sold out... Sorry!

The ANCHOR - "The Oldskool Series"

Sold out!

 

  

The ANCHOR - "The Oldskool Series"

CHF 380.00

  • 1.2 kg
  • Sold out... Sorry!

The FUCKYOU HAND - WACKY WOBBLER -CHROME-

Sold out!

 

 

CHROME - The FUCKINGING HANDS - WACKY WOBBLER

CHF 85.00

  • 0.25 kg
  • Sold out... Sorry!

The Lucky Bone "Wild Pilot" Limited edition

 

Sold out!

 

 

Lucky Bone Series "the Wild Pilot" Limited Edition

CHF 580.00

  • 0.8 kg
  • Sold out... Sorry!